The Steps to Staining Windows

It is seldom that we think about the windows in our home, except when there is a cold breeze coming through and we think of shutting the windows down. 

Yet, the harsh reality is the a home's windows really take a beating. For instance, sun, moisture and the weather are hard on the windows. In addition, time has an impact on the sill, with the finish degrading over time. Thus, sooner or later it will be time to sand and strip part of the window and, sometimes, the entire window. Here is what you'll need and how to do.

Looking for wood windows in the city of Piedmont, CA? Then Wood Windows Warehouse can help you with any wood windows you have.

In order to stain your windows you will need paint and varnish remover, stain, clear finish, a 120 and a 180 grit sandpaper, wood putty, and masking tape.

1) The very first step to accomplish the project is to sand the existing finish as necessary. You can begin with a 120 grit sand paper until most of the work is done. Then you can use a 180 grit sandpaper to create a smoother surface. However, if the finish is damaged beyond repair, you can remove it.

2) Now it is time to use wood putty to fill holes. After the putty dries up, do not forget to sand these areas.


3) After fixing the holes, it is now time to use masking tape to avoid getting the finish on the glass. In the sash window, remember to mask the two side edges too so that the finish won't stick when you open the window.

Broken Windshield? Duran's can help you with any auto glass repair in the city of Oakley!

4) Fourthly, after stripping the window, you can now apply the stain (if you want to darken or make its color warmer) and finish. Here you may encounter that the wood will not absorb the stain unevenly. However, by following the steps above carefully, you will avoid many of these problems.

5) Finally, it is time to remove the masking tape from the glass as soon as the finish starts drying up. This will prevent adhesive residue.